Belly Cast Kit - 4 Plaster Cloth Rolls
4 rolls of plaster cloth wrap to make a belly cast: a keepsake of your pregnancy that you can paint and hang on the wall.
What you get
- 4 x Mont Marte Signature plaster cloth wrap, 10cm x 4.5m
Bought separately these cost $39.96. In the kit you pay $34.99.
4 rolls is usually enough for a belly-only cast. For belly and chest, add a roll or two.
You'll also need
- Cling film and petroleum jelly, as a barrier between the plaster and skin
- A bowl of warm water, scissors and an old towel or drop sheet
- A helper
How to make a belly cast
- Cut all the plaster cloth into strips before you start.
- Cover the area with a generous layer of petroleum jelly, then wrap it with cling film.
- Dip a strip in warm water for a few seconds and smooth it on. Overlap the strips.
- Build up 3 to 4 layers, adding extra strips around the edges.
- Wait about 15 to 20 minutes until it feels firm, then gently wiggle it off.
- Let it dry fully for a day or two, then smooth with extra strips, seal with gesso and paint.
Good to know
- Never apply plaster to broken or irritated skin, and keep it away from the face.
- If you have sensitive skin, try a small patch test first.
- Plaster warms slightly as it sets. Stop if it feels uncomfortable.
Warning: plaster is harmful if swallowed and may cause irritation. Avoid breathing dust. Use with good ventilation. Avoid contact with eyes, skin and clothes. Wash thoroughly after handling.
